Try duplicating the line referring to the AW and a '.' (period) straight after the litterbug. Regards Graham Heath =20 -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Lowell, Tim: Sent: 20 September 2006 12:24 To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Sendmail error List, =20 Whenever I e-mail anything from my AW51G box with Solaris 8, I keep getting a sendmail error that says "unable to qualify my own domain name (AWNAME) - using short name". =20 I looked this up on Google, and they keep telling you to put an entry in the /etc/hosts file with the IP address and domain name, but they are assuming that you have a valid domain name (in DNS I suppose) , which I really don't. Has anybody figured out how to get rid of this error message? =20 Tim Lowell Control Systems Engineer ConocoPhillips Trainer Refinery (610) 364-8362 tim.c.lowell@xxxxxxxxxxxxxxxxxx =20 =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave