Re: [foxboro] STATE block

Hi Greg,

>More importantly, is there a way to configure my FoxDraw graphic to
force 
>the display of these parameters to update on change or on say an 
>every-5-second basis?

What you could try is every time an operator changes a STATxx field you
could reload the graphic.  Example operator selects the bit he wants to
change (Set Relative Pick) = PICK1 TEST:STATE.STAT01.B1
Create a toggle button that does the following Display Manager Commands
toggle $PICK1
$ST0

Toggle will hopefully set the bit you want, and $ST0 will call up the
display again.

Sean
NZ Steel




NOTICE - This message and any attached files may contain information that is 
confidential, legally privileged or proprietary.  It is intended only for use 
by the intended recipient. If you are not the intended recipient or the person 
responsible for delivering the message to the intended recipient, be advised 
that you have received this message in error. Any dissemination, copying, use 
or re-transmission of this message or attachment, or the disclosure of any 
information therein, is strictly forbidden. BlueScope Steel Limited does not 
represent or guarantee that this message or attachment is free of errors, virus 
or interference. 
   
If you have received this message in error please notify the sender immediately 
and delete the message.  Any views expressed in this email are not necessarily 
the views of BlueScope Steel Limited.
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: