Re: [foxboro] Running Hours Counter

I do this with an Accumulator block that runs at a one second interval, it's 
not connected to anything for the counts, just has a 1 in the field, set up the 
timing, and then connect the NOT running bit to hold the value. You then have 
the built in functions to reset etc....
Ken Moore
Process Controls Specialist

Celanese
Enoree, SC 





-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx on behalf of Ghamdi, Bander M
Sent: Tue 7/15/2008 5:12 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Running Hours Counter 
 
Gentlemen,
I need your help. How to build a counter that shows equipment running hours 
with start, stop and reset options using blocks not scripts?


Your help is highly appreciated.


Bander M. Al-Ghamdi
Specialist Unit.
DCS Engineer.
Tel: +96635762252
e-Mail: Bander.ghamdi.3@xxxxxxxxxx<mailto:Bander.ghamdi.3@xxxxxxxxxx>




 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 


-- No attachments (even text) are allowed --
-- Type: application/ms-tnef
-- File: winmail.dat


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: