Re: [foxboro] Restoring AW51B to larger drive
- From: "Rarden, Tim" <tim.rarden@xxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Fri, 19 Oct 2007 10:56:51 -0400
Steve,
Thanks for the reply.... I followed the procedure that you posted for
me.... However, I am still getting the same response.... More in
formation to follow:
1. We are using version 6.1 Day 0 cd
2. We have a DDS3 tape backup unit using 4mm tapes (backup to a single
tape)
3. We are using QF #991274D tape restore script (on floppy)
4. System is booting fine after Day 0 install.
Any help would be most appreciated!!!
Best Regards,
=20
Tim Rarden
Process Control Engineer
SMART PAPERS HOLDINGS LLC
"You're Brilliant. We're SMART. Imagine the Possibilities"
601 N. B Street
Hamilton, OH 45013
(Direct) 513-869-5278
(Cell) 513-240-6680
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Mize, Stephen
Sent: Thursday, October 18, 2007 10:32 AM
To: foxboro@xxxxxxxxxxxxx; foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Restoring AW51B to larger drive
This may help!!!
=20
In case of a drive failure or replacement of a drive that exhibiting
read and write errors, follow this procedure. It covers, installing 6.2
day 0 software on to a AW51B 18 GB hard drive (this is done to set up
the partitions on the drive) and restoring the drive from a backup
tape/tapes.=20
=20
Please read the completed procedure, you need to understand it before
proceeding. =20
=20
To install 6.2 day 0 and restore a backup tape/tapes on a AW51B 18.2 GB
hard drive.
=20
1. Boot with 6.2 day 0 Cdrom.
At the OK prompt type: boot cdrom. (with the 6.2 day 0 cd in the drive)
=20
2. At the login prompt=20
type: root (logs in to the station)
=20
3. Copy the file md.db.18200.aw51.Z to the /tmp dir=20
type: cp /cdrom/databases/md.db.18200.aw51.Z /tmp
(copies the file to the /tmp dir for installation on a
18 GB drive)
=20
4. Install I/A 6.2 day 0 on to the hard drive.=20
type: ia_install (follow the prompts type of station etc; AW51 B)
=20
5. Check to be sure the station boots after the day 0 load.
type: reboot -- -r (reboots the station to a day 0)
=20
6. After a good reboot, shutdown and halt the AW.
=20
7. Boot station with the day 0 cdrom and do the restore without
restoring the raw partition. The raw partition has the information on
the hard drive size and it is no longer correct. The correct information
was placed on the drive when the day 0 was installed.
Type: boot cdrom (with 6.2 day 0 cd in drive)
Type: restore (with the first or only backup tape in the tape drive)
=20
If the backup was done using the dmp0_8MM command, you will have 3
tapes continue with instruction 8. The first 2 tapes will be restored.
=20
If the backup was done with the backup command, you will have 1 tape
continue with instruction 9. The first 2 sections of the tape will be
restored.
=20
8. Enter the station type AP, AW or WP.
Type: AW
Answer y (yes) to the question: Were these tapes made using a dmp0_8MM
utility? Type: y =20
Please load tape containing file system dump level 0 tape and press
<CR>. Press enter (this will restore the /, /var, /usr and /opt
partitions)
Were these dump tapes created with a concatenated /opt partition? Answer
n (no) type: n (now completing the /opt partition)
Please load tape containing the Informix raw partition and press <CR>.
Load tape 2 Informix tape in to drive. Wait till tape settles.
Press: enter (this will load the Informix data)
Please load tape containing the mirrored_disk raw database
/dsk/rdsd/c0t0d0s3 and press <CR>
DO NOT PRESS ENTER.
We do not want to restore the mirrored_disk raw database. Press Ctrl, c
this will stop restore.
The restore is now complete. Restart the station.
Type: halt
At the ok prompt type: boot -r
The station will reboot on the 18 GB drive.=20
=20
9. Enter the station type AP, AW or WP.
Type: AW
Answer y (yes) to the question: Were these tapes made using a dmp0_8MM
utility? Type: y =20
Please load tape containing file system dump level 0 tape and press
<CR>. Press enter (this will restore the /, /var, /usr and /opt
partitions)
Were these dump tapes created with a concatenated /opt partition? Answer
n (no) type: n (now completing the /opt partition)
Please load tape containing the Informix raw partition and press <CR>.
There is 1 tape when the backup command is used and it contains the
Informix data. You leave the tape in the drive.
Press: enter (Informix data will be located on the tape and loaded)
Please load tape containing the mirrored_disk raw database
/dsk/rdsd/c0t0d0s3 and press <CR>
DO NOT PRESS ENTER.
We do not want to restore the mirrored_disk raw database. Press Ctrl c,
this will stop restore.
The restore is now complete. Restart the station.
Type: halt
At the ok prompt type: boot -r
The station will reboot on the 18 GB drive.=20
=20
10. I would be a good time to make a new backup tape. Be sure to label
the tape software release level, letterbug, the date and that it backed
up an 18 GB drive.
=20
=20
=20
=20
=20
=20
=20
=20
=20
=20
=20
________________________________
From: foxboro-bounce@xxxxxxxxxxxxx on behalf of Boulay, Russ
Sent: Thu 10/18/2007 9:18 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Restoring AW51B to larger drive
Did you perform an ia_install on the hd first to establish partition
sizes
The restore your tape...
Russ Boulay
Global Product Support
Invensys Process Systems
Foxboro, MA, USA 02035
Telephone: +1-866-746-6477 (USA, Canada)
+1-508-549-2424 (Worldwide)
E-mail: ips.csc@xxxxxxxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Rarden, Tim
Sent: Thursday, October 18, 2007 10:13 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Restoring AW51B to larger drive
All,
Am attempting to restore an AW51B to a station with 4.2GB hard drive.
Original has a 1GB hard drive I believe. Anyway the restore seems
successful but when rebooting it cycles with "PANIC: vfs_mountroot:
Cannot mount root" Error.
=3D
Any help would be appreciated.
=3D
Best Regards,
=3D
Tim Rarden
Process Control Engineer
SMART PAPERS HOLDINGS LLC
"You're Brilliant. We're SMART. Imagine the Possibilities"
601 N. B Street
Hamilton, OH 45013
(Direct) 513-869-5278
(Cell) 513-240-6680
=3D
=3D
=3D
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=3D
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
=3D
Confidentiality Notice:
This e-mail and any associated files are intended solely for the
individual=3D
or entity to whom they are addressed. Please do not copy it or use it
for =3D
any purposes, or disclose its contents to any other person. Further,
this e=3D
-mail and any associated files may be confidential and further may be
legal=3D
ly privileged. This email is from the Invensys Process Systems business
uni=3D
t of Invensys plc which is a company registered in England and Wales
with i=3D
ts registered office at Portland House, Bressenden Place, London, SW1E
5BF =3D
(Registered number 166023). For a list of European legal entities
within t=3D
he Invensys Process Systems business group, please click here
http://www.in=3D <http://www.in=3D/>=20
vensys.com/legal/default.asp?top_nav_id=3D3D77&nav_id=3D3D80&prev_id=3D3D=
77.
If you have received this e-mail in error, you are on notice of its
status.=3D
Please notify us immediately by reply e-mail and then delete this
message =3D
from your system. Thank you for your co-operation. You may contact our
Help=3D
desk on +44 (0)20 7821 3859 / 2105 or email
inet.hqhelpdesk@xxxxxxxxxxxxx T=3D
his e-mail and any attachments thereto may be subject to the terms of
any a=3D
greements between Invensys (and/or its subsidiaries and affiliates) and
the=3D
recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
Confidentiality Notice:
This e-mail and any associated files are intended solely for the
individual or entity to whom they are addressed. Please do not copy it
or use it for any purposes, or disclose its contents to any other
person. Further, this e-mail and any associated files may be
confidential and further may be legally privileged. This email is from
the Invensys Process Systems business unit of Invensys plc which is a
company registered in England and Wales with its registered office at
Portland House, Bressenden Place, London, SW1E 5BF (Registered number
166023). For a list of European legal entities within the Invensys
Process Systems business group, please click here
http://www.invensys.com/legal/default.asp?top_nav_id=3D77&nav_id=3D80&pre=
v_i
d=3D77.
If you have received this e-mail in error, you are on notice of its
status. Please notify us immediately by reply e-mail and then delete
this message from your system. Thank you for your co-operation. You may
contact our Helpdesk on +44 (0)20 7821 3859 / 2105 or email
inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail and any attachments thereto
may be subject to the terms of any agreements between Invensys (and/or
its subsidiaries and affiliates) and the recipient (and/or its
subsidiaries and affiliates).
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
