Re: [foxboro] Resetting graphics optimization for FoxView?

Hi Kevin,

We reach an optimised callup result on calling each Foxview display 3 times
in the following sequence :
for i in 1 2 3
do
   - Call it the first time
   - Wait in a loop until <$DMNAME>ST0 reaches the new display (use
/opt/fox/bin/tools/omgetimp)
   - Wait 1 second
done

The whole sequence takes about 5 - 10 seconds
Greetings,
Lieven Taleman
B.V.B.A. Talsoft - Belgium

-----Oorspronkelijk bericht-----
Van: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]Namens Kevin FitzGerrell
Verzonden: maandag 29 mei 2006 0:53
Aan: foxboro@xxxxxxxxxxxxx
Onderwerp: Re: [foxboro] Resetting graphics optimization for FoxView?


Thanks Shaun,

Is that what you're doing?  If so, do you have to allow the 30-45 seconds
for
each graphic callup that it would take for the objects called to timeout or
can
you run through them with just a few seconds between callups?

Regards,

Kevin

Quoting "Goldie, Shaun S" <Shaun.Goldie@xxxxxxxxxxxxxxxxxx>:

> Kevin
> im not aware of a quick way
> but after scripting each display callup on one workstation
> the optimised graphics can be copied to the other stations
> Shaun
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx
> [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Kevin FitzGerrell
> Sent: Monday, 29 May 2006 10:19
> To: foxboro@xxxxxxxxxxxxx
> Subject: [foxboro] Resetting graphics optimization for FoxView?
>
>
> Hi all,
>
> I've got just a few workstations running FoxView (testing, before we =
> purchase a
> 100 pack of licenses and do the whole site) and ran into a few issues on
> =
> the FV
> workstations during some upgrade work.
>
> As part of merging two I/A networks under a V8.1 Mesh, I had to =
> re-address one
> of the two networks (new NSAP addresses). After the address change for
> =
> all the
> stations, graphic callup was very slow (predictably) because the =
> graphics files
> were optimized for the wrong addresses. The same issue occurs when =
> upgrading or
> merging control stations.
>
> For the Display Manager graphics, the fix is easy. Go to the graphics =
> directory
> on each AW and WP and run "pdfpack -r *" to clear the optimizations and
> =
> allow
> the graphics to call up with only a momentary delay as they
> re-optimize.
>
> Anyone have any good solution to this problem with FoxView graphics? =
> The
> painful solution is to call up each of the 4000 graphics and overlays =
> twice
> (about 30 seconds on the first callup), on each FoxView workstation. I
> =
> tried
> being a little smarter and ran a script to run fdf_g and g_fdf on each
> =
> graphic.
>  This cleared the optimization, but introduced other problems in the =
> graphics
> which had been migrated from Display Manager (calling an overlay caused
> =
> the main
> graphic to revert to the previous display).
>
> Regards,
>
> Kevin FitzGerrell
> Sr. Control Systems Engineer
> Carter Holt Harvey, Ltd.
> =20
> =20
> ________________________________________________________
> _______________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
> =20
> foxboro mailing list: http://www.freelists.org/list/foxboro
> to subscribe: =
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
> to unsubscribe: =
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
> =20
>
>
>
> ______________________________________________________________________
> _
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: http://www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>



_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave




 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: