Kevin the foxboro like me is paid by the hour so you have to wait Shaun -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Kevin FitzGerrell Sent: Monday, 29 May 2006 10:53 To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Resetting graphics optimization for FoxView? Thanks Shaun, Is that what you're doing? If so, do you have to allow the 30-45 = seconds for each graphic callup that it would take for the objects called to timeout = or can you run through them with just a few seconds between callups? Regards, Kevin Quoting "Goldie, Shaun S" <Shaun.Goldie@xxxxxxxxxxxxxxxxxx>: > Kevin > im not aware of a quick way > but after scripting each display callup on one workstation > the optimised graphics can be copied to the other stations > Shaun >=20 > -----Original Message----- > From: foxboro-bounce@xxxxxxxxxxxxx > [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Kevin FitzGerrell > Sent: Monday, 29 May 2006 10:19 > To: foxboro@xxxxxxxxxxxxx > Subject: [foxboro] Resetting graphics optimization for FoxView? >=20 >=20 > Hi all, >=20 > I've got just a few workstations running FoxView (testing, before we = =3D > purchase a > 100 pack of licenses and do the whole site) and ran into a few issues = on > =3D > the FV > workstations during some upgrade work. >=20 > As part of merging two I/A networks under a V8.1 Mesh, I had to =3D > re-address one > of the two networks (new NSAP addresses). After the address change for > =3D > all the > stations, graphic callup was very slow (predictably) because the =3D > graphics files > were optimized for the wrong addresses. The same issue occurs when =3D > upgrading or > merging control stations. >=20 > For the Display Manager graphics, the fix is easy. Go to the graphics = =3D > directory > on each AW and WP and run "pdfpack -r *" to clear the optimizations = and > =3D > allow > the graphics to call up with only a momentary delay as they > re-optimize. >=20 > Anyone have any good solution to this problem with FoxView graphics? = =3D > The > painful solution is to call up each of the 4000 graphics and overlays = =3D > twice > (about 30 seconds on the first callup), on each FoxView workstation. I > =3D > tried > being a little smarter and ran a script to run fdf_g and g_fdf on each > =3D > graphic. > This cleared the optimization, but introduced other problems in the = =3D > graphics > which had been migrated from Display Manager (calling an overlay = caused > =3D > the main > graphic to revert to the previous display). >=20 > Regards, >=20 > Kevin FitzGerrell > Sr. Control Systems Engineer > Carter Holt Harvey, Ltd. > =3D20 > =3D20 > ________________________________________________________ > _______________ > This mailing list is neither sponsored nor endorsed by Invensys = Process > Systems (formerly The Foxboro Company). Use the info you obtain here = at > your own risks. Read = http://www.thecassandraproject.org/disclaimer.html > =3D20 > foxboro mailing list: http://www.freelists.org/list/foxboro > to subscribe: =3D > mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin > to unsubscribe: =3D > mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave > =3D20 >=20 > =20 > =20 > ______________________________________________________________________ > _ > This mailing list is neither sponsored nor endorsed by Invensys = Process > Systems (formerly The Foxboro Company). Use the info you obtain here = at > your own risks. Read = http://www.thecassandraproject.org/disclaimer.html > =20 > foxboro mailing list: http://www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave > =20 > =20 =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave