Re: [foxboro] Remote Exceed screen Updates slowly


Thanks Alex. The info was there. Just had to find it.

Subject: Re: [foxboro] Remote Exceed screen Updates slowly
Date: Thu, 8 Nov 2007 12:34:07 -0500
From: "Johnson, Alex P \(IPS\)" <alex.johnson@xxxxxxxxxxxxxxxx>

Display update rates can be controlled by the dmcfg file and the
specification of the DM type.

Check out 'Display Engineering for 50-Series' - B0193MQ.

Regards,

Alex Johnson
Invensys Systems, Inc.
10900 Equity Drive
Houston, TX 77041
713.329.8472 (voice)
713.329.1700 (fax)
713.329.1600 (switchboard)
alex.johnson@xxxxxxxxxxxxxxxx


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of John.Spigel@xxxxxxxxxxxx
Sent: Thursday, November 08, 2007 10:22 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Remote Exceed screen Updates slowly

Hello all knowing list members!
I am moving numerous Exceed X trerminals over from an AW51C box to an
AW51G
with 7.1.1. Screen values on the local console update quickly. Screen
updates on the remote Xceed boxes take about 5-7 seconds to update.
There
are no values smurfed. It just seems to be slow. I believe somewhere on
this list there was mentioned a parameter setting where you could change
the update speed. Note that I also have the same version Xceed boxes
working well on a version 7.1 install.
Thanks!
John Spigel
Clariant Corp. Process Controls Engineer

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: