The -cc 3 seems to do the trick. Thanks, Frits. -----Original Message----- From: William C. Ricker [mailto:wcricker@xxxxxxxxxxxxx] Sent: Tuesday, 14 October 2003 01:29 To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] RealVNC question. Fritz, Try this for your startup : vncserver :<display number> -cc 3 -depth 8 Regards, William C. Ricker FeedForward, Inc. Marietta, GA, USA wcricker@xxxxxxxxxxxxxxx 770-426-4422 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave EOM NOTICE - This message and any attached files may contain information that is confidential and/or subject of legal privilege intended only for use by the intended recipient. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, be advised that you have received this message in error and that any dissemination, copying or use of this message or attachment is strictly forbidden, as is the disclosure of the information therein. If you have received this message in error please notify the sender immediately and delete the message. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave