Re: [foxboro] RTD modules

We use a lot of FBM203's. They have been very reliable.  As Dirk points 
out, use a value of 43 in the SCI parameter.  42 limits the low range to 
zero DEG C.  43 expands the range well into the negative numbers but I 
can't remember how far.  The AIN block HSCALE and LSCALE defines the 
portion of the full scale range you want to use automatically if you 
want to display in DEG C.  You have to use KSCALE and BSCALE to convert 
your reading to DEG F.

Cheers,
Tom VandeWater

Terry Currie wrote:
> List
>  
> Has anyone had experience with a FBM 203 rtd module.
> 
> Terry
> 
> 
>                             IMPORTANT NOTICE !
> This E-Mail transmission and any accompanying attachments may contain
> confidential information intended only for the use of the individual or
> entity named above. Any dissemination, distribution, copying or action taken
> in reliance on the contents of this E-Mail by anyone other than the intended
> recipient is strictly prohibited and is not intended to, in anyway, waive
> privilege or confidentiality. If you have received this E-Mail in error please
> immediately delete it and notify sender at the above E-Mail address.
> 
> Agrium uses state of the art anti-virus technology on all incoming and
> outgoing E-Mail. We encourage and promote the use of safe E-Mail management
> practices and recommend you check this, and all other E-Mail and attachments
> you receive for the presence of viruses. The sender and Agrium accept no 
> liability
> for any damage caused by a virus or otherwise by the transmittal of this 
> E-Mail.
>                         IMPORTANT NOTICE 
> 
> 
> 
>  
>  
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>  
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>  
> 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: