Re: [foxboro] ROC407 FloBoss in I/A

Thank you, Lisa

1. The address i would like to read in the FloBoss is 10, function 4, flow 
point value.

2.Pls find attached dsk2file-ed and winzipped saveall for DI APEK02 (we have 
Device Integrator installed as Foreign Device gateway, disks 72901,2, Modbus 
Master RTU or ASCII V344,
ECB20 is OK in System management, P0979VB switches closed: 4-3(27), 3-1(17), 
1-3,1-7,1-8, 2-1(9), 2-2(10), 2-8(16), 3-5(21). 
Receive and Transmit already crossed in Adam RS485/RS232 Converter.

3. Also attached are snapshots (inserted into a Word file ) of fd30stat 
displays.

This is for our I/A installation at the biggest Gas Field Processing Plant  
over the Polar Circle which is now being started up (second stage).
Thank you and Best Regards
Guennadi

-----Original Message-----
From: Kanakry, Lisa [mailto:Lisa.Kanakry@xxxxxxxxxxxx]
Sent: Tuesday, December 10, 2002 11:20 PM
To: Guennadi A. Sinelnikov
Cc: Kanakry, Lisa
Subject: RE: [foxboro] ROC407 FloBoss in I/A


Guennadi,
I am happy to assist you.  Just for your information, in the future, the
easiest way to contact us for technical assistance is to address emails to
ips.csc@xxxxxxxxxxxxx
Please provide me with the following:
1) address you would like to read in the FloBoss
2) saveall which has been file2dsk'ed.
3) snapshot of the fdstat counters

Thanks and regards,
Lisa Kanakry

> -----Original Message-----
> From: Guennadi A. Sinelnikov [SMTP:gsinelni@xxxxxxxxxx]
> Sent: Tuesday, December 10, 2002 1:07 PM
> To:   lkanakry@xxxxxxxxxxx
> Subject:      FW: [foxboro] ROC407 FloBoss in I/A
> 
> Dear Lisa,
> Could you give your advice on the matter or redirect me properly.
> EMEA TAC replied the had no special knowledge on FloBoss integration into
> I/A.
> I do not know which TAC Ken meant, i have only email to EMEA TAC.
> Thank You
> Best Regards
> Guennadi
> 
> -----Original Message-----
> From: Gunston, Ken [mailto:kgunston@xxxxxxxxxxx]
> Sent: Tuesday, December 10, 2002 8:42 PM
> To: Guennadi A. Sinelnikov
> Cc: foxboro@xxxxxxxxxxxxx
> Subject: RE: [foxboro] ROC407 FloBoss in I/A
> 
> 
> Please ask for help from TAC. They will use us as backup if needed.
> 
>       Ken
> 
> > -----Original Message-----
> > From:       Guennadi A. Sinelnikov [SMTP:gsinelni@xxxxxxxxxx]
> > Sent:       Tuesday, December 10, 2002 12:24 PM
> > To: Gunston, Ken
> > Cc: foxboro@xxxxxxxxxxxxx
> > Subject:    RE: [foxboro] ROC407 FloBoss in I/A
> > 
> > Thank you, Ken.
> > Protocol Handler Guide i received from John Beeston (EMEATAC).ECB20 is
> > configured exactly as per
> > the Guide.
> > We also use "showfd" utility but can not uderstand properly what it
> > returns from FloBoss, though the request from FD is shown clearly. 
> > We also made fd30stat display working, but can not interpret the counts
> it
> > shows. 
> > We do not know either, if the response message from FloBoss should  be
> > regarded as Fixed or Variable.
> > Any advise would be appreciated.
> > Best Regards
> > Guennadi
> > 
> > 
> > -----Original Message-----
> > From: Gunston, Ken [mailto:kgunston@xxxxxxxxxxx]
> > Sent: Monday, December 09, 2002 9:41 PM
> > To: Tac_mgmt; Kanakry, Lisa
> > Cc: Johnson, Alex (Foxboro); Guennadi A. Sinelnikov; Hunt, Michael L
> > Subject: RE: [foxboro] ROC407 FloBoss in I/A
> > 
> > 
> > Lisa,
> > 
> > Please send Guennadi A. Sinelnikov a copy of the user manual showing
> > example
> > of FDIDMS and FDRIN block configurations if the site does not have it.
> > 
> > Guennadi, you should have received the Protocol Handler Guide (User's
> > Guide)
> > with delivery of the product. Let TAC know if yoiu did not receive it. 
> > 
> > Do you get any error messages from the FloBoss when you pole it? Is the
> > setup of the ECB20 block for the port set exactly as in the User Guide?
> As
> > Alex suggested you can use a datascope or use the built-in "showfd"
> > utility
> > to determine what you have wrong. If you still need help from TAC, let
> TAC
> > know what you see on the FDSTAT display.
> > 
> >     Ken
> > 
> > > -----Original Message-----
> > > From:     Johnson, Alex (Foxboro) 
> > > Sent:     Monday, December 09, 2002 12:19 PM
> > > To:       gsinelni@xxxxxxxxxx
> > > Cc:       Gunston, Ken
> > > Subject:  RE: [foxboro] ROC407 FloBoss in I/A
> > > 
> > > You might want to contact Ken Gunston about you issues. His group
> > > developed this product and provides support. 
> > > 
> > > Of course, you need to get a scope to examine the packets on the
> cable.
> > > Lack of such a device will allow even trivial flaws to completely
> > prevent
> > > operation.
> > > 
> > > 
> > > Regards,
> > > 
> > > Alex Johnson
> > > Invensys
> > > 10707 Haddington
> > > Houston, TX 77063
> > > 713.722.2859 (office)
> > > 713.722.2700 (switchboard)
> > > 713.932.0222 (fax)
> > > ajohnson@xxxxxxxxxxx
> > > For the latest information on ArchestrA, go to
> > > www.invensys.com/Archestra.html
> > > <http://www.invensys.com/divisions/Archestra.html>.
> > > 
> > > 
> > >   -----Original Message-----
> > >   From:   Guennadi A. Sinelnikov [SMTP:gsinelni@xxxxxxxxxx]
> > >   Sent:   Monday, December 09, 2002 2:21 AM
> > >   To:     foxboro@xxxxxxxxxxxxx
> > >   Subject:        [foxboro] ROC407 FloBoss in I/A
> > > 
> > >   Dear List,
> > >   we can not get data from ROC407 FloBoss controller.
> > >   We have Device Integrator installed as Foreign Device gateway (disks
> > > 72901,2, Modbus Master RTU or ASCII V344),
> > >   ECB20 is OK in System management, P0979VB switches closed:
> > > 1,2,3,7,8,9,10,15,16,21,27.
> > >   We have written some data in location 10 of FloBoss by ROCLINK
> > > program and can not read it by operation 4.
> > >   If somebody happened to have experience in integration of this
> > > controller into I/A system, please give us the example of
> > >   configuration of FDIDMS and FDRIN blocks. (gsinelni@xxxxxxxxxx).
> > >   Thank you
> > >   Best Regards,
> > >   Guennadi
> > > 
> > > 
> > >    
> > >    
> > >   
> > >
> _______________________________________________________________________
> > >   This mailing list is neither sponsored nor endorsed by Invensys
> > > Process
> > >   Systems (formerly The Foxboro Company). Use the info you obtain here
> > > at
> > >   your own risks. Read
> > > http://www.thecassandraproject.org/disclaimer.html
> > >    
> > >   foxboro mailing list:
> > > http://www.freelists.org/list/foxboro
> > >   to subscribe:
> > > mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> > >   to unsubscribe:
> > > mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
> > >    

-- No attachments (even text) are allowed --
-- Type: application/x-zip-compressed
-- File: FDSTAT.ZIP
-- Desc: FDSTAT.ZIP


-- No attachments (even text) are allowed --
-- Type: application/x-zip-compressed
-- File: Saveall.zip
-- Desc: Saveall.zip


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: