Hi. Was this Remote MMI basicly the WP70 sent out as FoxPack? If so, I think it configures as a WP70. There could be a license number required, however. W C Ricker -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Burnham, Rob C. Sent: Monday, November 26, 2001 9:47 AM To: 'Foxboro List'; 'Invesys - Foxboro CSC' Subject: [foxboro] REmote MMI Howdy, Way back when, I purchased Foxboro's "Remote MMI" package, the plan being to connect to an AW70 for remote display purposes. In Foxboro's SysDef 2.0 under Create Station there was a selection for Remote MMI, in SysDef 2.1 this does not exist. There is a selection for XTerm, did this replace REmote MMI? Rob Burnham Systems Engineer - Process GLATFELTER > http://www.glatfelter.com Ph: 920-727-2426 Beyond Paper..... is everything we do above and beyond making great paper - that makes us unique. ___________________________________________________________________ This list is neither sponsored nor endorsed by The Foxboro Company. Use the information obtained here at your own risk. For disclaimer, see http://www.thecassandraproject.org/disclaimer.html#maillist list info: //www.freelists.org/list/foxboro subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave ___________________________________________________________________ This list is neither sponsored nor endorsed by The Foxboro Company. Use the information obtained here at your own risk. For disclaimer, see http://www.thecassandraproject.org/disclaimer.html#maillist list info: //www.freelists.org/list/foxboro subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave