Re: [foxboro] RES: alarm inhibiting vs. alarm disabling - process summary reporter

List,

We use the Process Summary Reporter to build a configuration file and
the schedule execution
of the report (with a copy to a file) using crontab in Unix and Task
Scheduler in WinXP.

The ascii file in /usr/fox/psr/files/out1 always gets built at the
correct time and contains the "good" data in both Unix and WinXP.

In Unix the selected printer (InkJet properly configured in the Fox
system) always prints the "good" data
exactly the same as the out1 file.

In WinXP, the selected printer (InkJet properly configured in the
Foxsystem) always prints empty pages. If I open the file   out1   in
WordPad and print to the InkJet, the print works correctly. If this is a
three page report, then the print from the scheduled task is three empty
pages.

In WinXP the batch file   run_rp.bat contains

\usr\fox\psr\psr_rptr.exe \usr\fox\psr\cfg\INH_PWC


Has anyone been able to schedule a PSR report to print in WinXP (or
WinNT)?

Thanks,

Terry
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: