Re: [foxboro] RE-RE-REbuilding a WP70

OK, here's what we know.

The motherboard appears OK, NT boots and runs, everything seems OK there.

Commit disk seems OK, packages are marked NOTYET and the installation 
installs the I/A software.  We get a foxboro screen, but no 
connection to the nodebus.

DNBX green light blinks one time.  The tip on this might be the key!

We are in the process of checking the serial cabling.  Although it 
was working when the computer crashed, it's possible that it got 
messed up when the box was being removed.  Rebuilt and replaced.  All 
of the cables were very tight and the PC was in a cramped enclosure.

Thanks for all of the help so far.  I'll let you know what the 
problem was when (or if) we get it fixed.

Thanks again,
David

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: