Re: [foxboro] REPLACE DNBI WITH DNBT

 
Jose Luis, 

No, I didn't re-commit the system..... in fact, there is no change in System
Definition, as you don't specify (you can't) the interface to the nodebus
foran AW or WP station in SysDef. Looking in Foxboro documentation, I read
that the DNB(whatever) only work as signal converters.....
Regards,
Pablo 
----------------------------------------------------------------------------
From:  Molina Jose Luis <molina@xxxxxxxxxxxxxxxxxx>
Reply-To:  foxboro@xxxxxxxxxxxxx
To:  foxboro@xxxxxxxxxxxxx
Subject:  Re: [foxboro] REPLACE DNBI WITH DNBT
Date:  Wed, 22 Nov 2006 10:03:23 +1100
>Pablo,
>          did you commit the new DNBT on your system? (system definition)
>          cheers,
>                          jose luis
>
>At 09:42 AM 22/11/2006, you wrote:
>>
>>Hi list,
>>
>>I need to move an AW70 (very old one, Pentium 300 Mhz running I/A NT
Nodebus
>>6.5.1) from its current location (close to the I/A system cabinet) to a
room
>>some 60 m away. The AW connects to the nodebus through a DNBI interface.
As
>>Idon't have a thicknet (AUI) cable long enough, I will replace the DNBI
with
>>a DNBT.
>>
>>I have a working set of DNBT+cables (tested in a separate system). Before
>>moving the AW, I made a test to make sure the new configuration would
work.
>>BUT IT DIDN'T!!!!
>>
>>This is how I proceeded:
>>
>>1 - I configured the Nodebus NIC (3Com Etherlink III - ISA) with media
type
>>10Base T (It was previously configured with Thicknet-AUI). I have a second
>>ethernet card, a 3Com Etherlink XL PCI, connected to the maintenance
>>ethernetnetwork.
>>
>>2 - Rebooted the AW, with the new cables and DNBT (with proper letterbug)
>>installed
>>
>>After this, the nodbus never came up again. I rebooted the DNBT and the AW
a
>>couple of times with no result. As a bonus, the second card didn't link to
>>the ethernet network either.
>>
>>I made the same test with a second set of cables+DNBT, with the same
result.
>>
>>
>>The "Nodebus Activity" "TP Activity" and  "Link" leds of the DNBT were off
>>all the time. The module helth green led was on and the red one was off.
>>
>>I know that my cables are OK and my DNBT is OK. I know that I connected
the
>>DNBT to the correct NIC. I can only think I have a configuration problem
>>(should I recommit? I think not...., the DNBx's are level converters only,
>>according to Foxboro)
>>
>>So I changed my NIC configuration back to AUI, reinstalled the DNBI and
>>rebooted. After that the system was up and running again..... except for
the
>>second NIC, that never worked again....
>>
>>I think maybe my second NIC was damaged in the process......
>>
>>Has anybody had a similar problem?.....
>>
>>Regards
>>
>>Pablo Lioi
>>
>>Systems Engineer
>>
>>TOTAL AUSTRAL S.A.
>>
>>Tierra del Fuego
>>
>>Argentina
>>
>>
>>
>>--------------------------------------------------------------------------
--
>>Express yourself instantly with MSN Messenger! MSN Messenger[1] Download
>>today it's FREE!
>>
>>--- Links ---
>>    1 http://g.msn.com/8HMAEN/2737??PS=47575
>>
>>
>>_______________________________________________________________________
>>This mailing list is neither sponsored nor endorsed by Invensys Process
>>Systems (formerly The Foxboro Company). Use the info you obtain here at
>>your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>>
>>foxboro mailing list:             http://www.freelists.org/list/foxboro
>>to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
>>to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>>
>
>
>
>_______________________________________________________________________
>This mailing list is neither sponsored nor endorsed by Invensys Process
>Systems (formerly The Foxboro Company). Use the info you obtain here at
>your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
>foxboro mailing list:             http://www.freelists.org/list/foxboro
>to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
>to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>


----------------------------------------------------------------------------
Don't just search. Find. MSN Search[1] Check out the new MSN Search! 

--- Links ---
   1 http://g.msn.com/8HMAEN/2746??PS=47575
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: