Re: [foxboro] Process Alarms

Did you get the file set under /usr/fox/customer/alarms and
/usr/fox/customer/config ?
That's where the files for configured changes to CAD and other alarm
displays are stored.

Regards,

William C Ricker
FeedForward, Inc.

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Murphy, Ronald T
Sent: Monday, April 13, 2009 2:50 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Process Alarms

List,
I have numerous P92 boxes with I/A Ver 8.1 installed.  We are on an outage
and now have the the opportunity to upgrade the boxes to ver 8.3 that we
purchased some time ago.  I ghosted one P92 so I could get the correct
drivers and version of Windows XP on the box.  I installed the new version
of I/A and all works correctly except the CAD alarms which has been
customized.  Has anyone had this problem and if so which files might could I
have forgotten to install or copy over to the new install.
Thanks for you help.
Ron Murphy
Xcel Energy
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: