Did you try doing a Checkpoint? James W. Hyde III Controls Technician Wellman Inc. Office: 228-533-4528 Cell: 228-332-1371 If the reader of this e-mail is not an intended recipient, you have = received this e-mail in error and any review, dissemination, = distribution or copying is strictly prohibited. If you have received = this e-mail in error, please notify the sender immediately by return = e-mail and permanently delete the copy you received. -----Original Message----- From: Corey R Clingo [mailto:clingoc@xxxxxxxxxxxxx] Sent: Monday, August 26, 2002 11:10 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Poor harried engineer (Tokyo) vs. the Integrator 30 (Godzilla) Yep, it's me again.... :) I'm trying to optimize the polling on one of our Integrator 30s by coalescing ABSCAN blocks. To try and make this as painless as possible, = I am creating a new ABSCAN block, cutting all the AINs, etc. over to it, = then deleting the old ABSCAN blocks that were previously scanning the = particular memory range of interest. I have but one problem: when I create the new ABSCAN block, it comes up = OK on everything, but all the registers read 0. The old ABSCAN blocks do = not read 0, nor does my RSLinx data monitor I'm running on a nearby PC. I've stopped and started the compound containing the new ABSCAN block. = I don't want to delete/undelete the ECB15 right now because the plant is running, but I will at some later opportune time if I can't fix this. Any ideas? Rational explanations? Corey clingo Sr. Engineer BASF Corp. =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave