Re: [foxboro] Peripheral Counters

No, these parameters cannot be connected directly.

If you have the remv/remd tools from FoxWatch on a Solaris AW you
ccould use them with a script to collect parameters periodically and
load them in to object manager variables.

Regards,

Kevin FitzGerrell

On 2/22/08, MClement@xxxxxxxxxxxxxxxx <MClement@xxxxxxxxxxxxxxxx> wrote:
> Hi All,
>
>
> Is it possible to connect to the peripheral counters on stations using
> Compound Block Parameter ?
>
> Ex: 802.3 Mac Resets, 802.4 Mac Resets, DMA Underruns, ..... etc
>
> Any idea in what document this could be found ?
>
>
>
> Thanks & Best Regards
>
> Mark
>
>
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: