Re: [foxboro] Parts required for Upgrade AW70 & WP70 Winnt OS to AW70&WP70 Win XP OS.

Thanks for your answer.

My question is if is required to pay any charge for License Upgrade from
I/A Series V6.3, Winnt to I/A Series V7.X, Win XP, or if is only
necessary to buy the Installation Software.
P/N: K0200WK- Windows XP Media 7 ..
P/N: K0200RL-System Definition
P/N: P0922KD-FoxView/FoxDraw V8.0.2

What else is necessary?

Regards,

Eddy Bustamante V.

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of William C. Ricker
Sent: Martes, 26 de Abril de 2005 03:34 p.m.
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Parts required for Upgrade AW70 & WP70 Winnt OS
to AW70&WP70 Win XP OS.=20

Well, you will certainly need to replace the PC software when the
hardware is upgraded past NT supported systems.  This may be
your largest expence.

The XP version requires an upgrade to version 7 IA software.

Release notes seem to indicate that the Micro IA will work in Ver 7
systems, and I didnt see anything about it requiring new bits
and pieces.

Depending on the current software level it may also be possible to
change out the AW and WP at different times, if the cost needs to be
spread out.  For this you would need a software version new enough
to coexist with Ver 7.

There are some requirements for minimum revision levels of certain
hardware to support one or another level of software. There also
may be EPROM updates required to some types of FBMs, so it really
would be a good idea to go thru all the hardware pieces and with
Foxboro docs (like release notes) as a guide, see what will work
with the Version 7 (or newer) software and what you would have to
change.

Regards,

William C. Ricker
FeedForward, Inc.
Marietta, GA  USA
770.426.4422
wcricker @ feedforward.com




-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Eddy Bustamante V.
Sent: Monday, April 25, 2005 8:02 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Parts required for Upgrade AW70 & WP70 Winnt OS to
AW70&WP70 Win XP OS.


Dear List:

A company is using I/A Series control System: 2 Micro I/A, 1 AW70 and 1
WP70, running over Windows NT OS. This company need upgrade his Control
System to Windows XP OS, because new PC=92s are no more supported by
Windows NT.

Which Parts are required for change this I/A Series Control System from
Windows NT to Windows XP Operating System?

Thanks in advance for your help.


Eddy Bustamante V.
Control y Automatizaci=F3n S.A.



_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave


=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: