Re: [foxboro] PLB_force

You cannot see it from the select menu but there is another way.
If you look at the info on the primary card ECB , you will see that there are 
parameters to
look at forced IOs.You will have to create MCIN blocks to look at them (long 
Integer input).I hav'nt used Fox for a while and cant remember all the finer 
details but I have used it that way before.You will need quite a bit of 
configuring and "Trial and Error".
Best of luck 
Daniel

>>> hafedh.ghodhbani@xxxxxxxxxxxx 15-Oct-01 09:50:33 >>>

Team,
Is it possible to display the forced On/off contacts of ladder logic
from the select menu. Currently the forced contacts can be seen only using
the PLB Monitor or PLB view.

Regards
Hafedh Ghodhbani
Control And Instrument Engineer
British Gas Tunisia
Tel:    00 216 74 259 250
Fax:    00 216 74 259 449

______________________________________________________________________
BG Energy Holdings Limited (a member of BG Group)
Registered in England No: 3763515
Registered Address:
            100 Thames Valley Park Drive
            Reading
            Berkshire   RG6 1PT   UK
Telephone:         +44 (0) 118 935 3222
Website:         http://www.BG-Group.com

This e-mail is intended only for the addressee named above.  As this 
e-mail may contain confidential or privileged information, please 
advise us immediately if you are not the named addressee or the person 
responsible for delivering the message to the named addressee.  The 
contents should not be disclosed to any other person nor copies taken.
______________________________________________________________________


___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist

list info:   http://www.freelists.org/list/foxboro
subscribe:   mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

 
 
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist

list info:   http://www.freelists.org/list/foxboro
subscribe:   mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: