Re: [foxboro] PID output alarming

Yesiree Bob, that was it. All the HOAIND & LOAIND connections in all the
default PIDxy faceplates & overlays were using RI1. Do I get a prize for
discovering it? Do I? Do I? Huh?

Brad Wilson
brad.wilson@xxxxxxxxxxxxxxxx
Invensys Systems, Inc
1090 King Georges Post Rd, Suite 204
Edison, NJ  08837
732-874-0087


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Boulay, Russ
Sent: Saturday, April 28, 2007 3:00 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] PID output alarming

Brad..

I see that the "enhanced faceplates"  in dd_1 are tied to RI1
The standard Faceplates... found in dd are tied to R01

So, I believe yo have found an issue in the default faceplates under the
dd_1 directory.

Recommend..open library object in FoxDraw and change the range from RI1
to RO1

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Wilson, Brad
Sent: Saturday, April 28, 2007 11:40 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] PID output alarming

Has anybody used output alarming in a PID (or related) block?  I'm
obviously missing something in the configuration, or it doesn't work the
way I expect.
 =3D


I'm using Foxview 9.0.1 on v 6.2.1.

On the default block display, the tick marks for the output alarm
settings (HOALIM/LOALIM) are displaying using the MEAS range
(HSCI1/LSCI1), not the OUT range (HSCO1/LSCO1) as I would expect.

When I use the up/down arrows to change the HOALIM, it uses the OUT
range to determine the both the percentages and the max/min value I can
set.

It also will not allow me to manually enter a value outside the OUT
range.

BUT, the indicators on the faceplate are using the MEAS range.

 =3D


The indicator bars for the the MEAS alarms (HH/LL & H/L) show correctly.

 =3D


I've checked this on both PID & PIDA blocks - I suspect the behaviour is
the same on PIDX, PIDE, etc.

 =3D


Brad Wilson

brad.wilson@xxxxxxxxxxxxxxxx

Invensys Systems, Inc

1090 King Georges Post Rd, Suite 204

Edison, NJ  08837

732-874-0087

 =3D





Confidentiality Notice:
The information contained in this electronic message and any
attachment(s) to this message are intended for the exclusive use of the
recipient(s) and may contain confidential, privileged or proprietary
information. If you are not the intended recipient, please notify the
sender immediately, delete all copies of this message and any
attachment(s). Any other use of the E-Mail by you is prohibited.


 =3D

 =3D

_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 =3D

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
 =3D




Confidentiality Notice:
The information contained in this electronic message and any
attachment(s) =3D
to this message are intended for the exclusive use of the recipient(s)
and =3D
may contain confidential, privileged or proprietary information. If you
are=3D
 not the intended recipient, please notify the sender immediately,
delete a=3D
ll copies of this message and any attachment(s). Any other use of the
E-Mai=3D
l by you is prohibited.


 =

 =

_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 =

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
 =




Confidentiality Notice:
The information contained in this electronic message and any attachment(s) =
to this message are intended for the exclusive use of the recipient(s) and =
may contain confidential, privileged or proprietary information. If you are=
 not the intended recipient, please notify the sender immediately, delete a=
ll copies of this message and any attachment(s). Any other use of the E-Mai=
l by you is prohibited.


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: