You could do something like this ICCAPI script: 16AW01-dmdo> more 16CP11tuning.icc OPEN 16CP11 READ byDuc GET *:* SUBSET PID* NAME DESCRP PBAND INT DERIV KD END CLOSE EXIT to run this iccdrvr.tsk command list on an AW-51: cd /opt/fox/ciocfg/api ./iccdrvr.tsk -i /home/dmdo/16CP11tuning.icc -d /var/tmp/16CP11tuning Your task is to do this recursively for all your CPs. Warning: Know what you're doing before running the ICC Driver Task. Duc -- Duc M. Do Dow Corning Corp. Carrollton Plant Carrollton, KY, US -----Original Message----- From: Ghodhbani, Hafedh [mailto:hafedh.ghodhbani@xxxxxxxxxxxx] Sent: Wednesday, May 28, 2003 7:26 AM To: 'foxboro@xxxxxxxxxxxxx' Subject: [foxboro] PID Tuning Hi list, Is there a script that records in a file all the PID/PIDA/PIDX blocks in all CPs the tuning parameters Pband, int, deriv and kd. I need to run this script once a week to see changes on them. You understand that manually it takes a lot of time. Please advise Thanks Hafedh Ghodhbani C&I engineer BG group, Tunisia +216 74 259 250 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave