Re: [foxboro] PI question about FXBAIS

OK, all is right with the world again.  Normally, when one or more PI lists
stop updating, I would stop and start the PI interface and hope that fixed
it.  However, I have never touched FoxAPI before.  So, I stopped & started
both PI and FoxAPI ... and everything came back.  All lists are updating
and my users are happy once more.

Is there a way to start & stop individual lists?  I don't like stopping the
interface for just a couple of non-updating points, because it breaks the
continuity of ALL points.

Brad Wilson
Process Control Engineer
ExxonMobil Chemical Co
Edison Synthetics Plant
732-321-6115
732-321-6177 fax
Brad.S.Wilson@xxxxxxxxxxxxxx

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: