Re: [foxboro] PI Server to I/A
- From: <MUGARTET@xxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Fri, 23 Jan 2004 09:10:14 -0300
Jaime,
If you have a second AW on the node you can install de PI interfase on =
it, and keep it off-line. When you shut down the "main" AW (the one with =
the PI-IF running) you start the "spare". The loss of data should be =
minimum. Check with the PI representative for license issues, but I =
think it shouldn't be a problem since you are always using one IF at a =
time.
Regards,
Mart=EDn
-----Mensaje original-----
De: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]En
nombre de Jaime Claramunt R. (Inforsa)
Enviado el: Viernes, 23 de Enero de 2004 09:03
Para: foxboro@xxxxxxxxxxxxx
Asunto: [foxboro] PI Server to I/A
Hi list,
Does anybody have a PI Server connected to Nodebus ? is it possible ?
We have a PI service running inside one AW51, and then connected to our =
LAN
through 2nd ethernet port.=20
The issue is when this station is down (maintenance or shutdown or =
reboot)
all our process data (10 processors) is lost. Today is becomming a big =
issue
because we summarize this data for daily reports...you canimagine the =
phone
ringing from big boss when there are some "extrange" values ...
Thanks
Jaime Claramunt
INFORSA Paper Mill
CHILE
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
AVISO LEGAL:
Esta informaci=F3n es privada y confidencial y est=E1 dirigida =
=FAnicamente a su destinatario. Si usted no es el destinatario original =
de este mensaje y por este medio pudo acceder a dicha informaci=F3n por =
favor elimine el mensaje. La distribuci=F3n o copia de este mensaje =
est=E1 estrictamente prohibida. Esta comunicaci=F3n es s=F3lo para =
prop=F3sitos de informaci=F3n y no debe ser considerada como propuesta, =
aceptaci=F3n ni como una declaraci=F3n de voluntad oficial de REPSOL YPF =
S.A. y/o subsidiarias y/o afiliadas. La transmisi=F3n de e-mails no =
garantiza que el correo electr=F3nico sea seguro o libre de error. Por =
consiguiente, no manifestamos que esta informaci=F3n sea completa o =
precisa. Toda informaci=F3n est=E1 sujeta a alterarse sin previo aviso.=20
This information is private and confidential and intended for the =
recipient only. If you are not the intended recipient of this message =
you are hereby notified that any review, dissemination, distribution or =
copying of this message is strictly prohibited. This communication is =
for information purposes only and shall not be regarded neither as a =
proposal, acceptance nor as a statement of will or official statement =
from REPSOL YPF S.A. and/or subsidiaries and/or affiliates. Email =
transmission cannot be guaranteed to be secure or error-free. Therefore, =
we do not represent that this information is complete or accurate and it =
should not be relied upon as such. All information is subject to change =
without notice.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
- Follow-Ups:
- Re: [foxboro] PI Server to I/A
- From: William C. Ricker
Other related posts:
- » Re: [foxboro] PI Server to I/A
- » Re: [foxboro] PI Server to I/A
- » Re: [foxboro] PI Server to I/A
- » Re: [foxboro] PI Server to I/A
- » Re: [foxboro] PI Server to I/A
- Re: [foxboro] PI Server to I/A
- From: William C. Ricker