Re: [foxboro] Operator action journal auto start at boot up

(Richard, The e-mail system is throwing extra 
characters into your messages (the '3D' that
shows up after every '=' sign.)

As such, it should look like this)

> Try :
>
> OJLOG=DLP01, Ehist01  (you have this already)
> gctsize=14            (add this with no spaces 
>                           within the statement)
> dmtlist=OJLOG         (add this with no spaces 
>                           within the statement)


However, at least since 6.1, the 'gctsize' and 'dmlist'
lines are in the tail end of file 'wp_51glbls.all',
which is the Foxboro def's, processed before the 
file 'init.user'.  As such, I'd have thought that
this variable creation step shouldn't be needed.

That being said, however, we tested it on a 6.2
AW51 (just did it).  Without the 'gctsize' and
'dmtsize', the variable is not changed to what's
in the 'init.user' file; rather it retains what's
in the standard definition ( OLOG=DLP00,Dqualdb ).

Learn something new every day.

Also seems in out test we see that the D or  E preceeding
the printer name or historian name is operating
to cause Disable or Enable, so use of a fake printer
or historian name is'nt indicataed.  Just use D to 
disable, and E to enable.  

Any questions about how the string should form 
up can be answered by setting the options like 
you want then using the 'OperActJournal' pick 
under the 'Config' menu.  Then use the VT100 
mode and type 'pref -DMNAME OJLOG' to see how 
it built the string.  Copy this into the 
init.user file.


W C Ricker
FeedForward, Inc.
Marietta, GA
 
 
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist

list info:   http://www.freelists.org/list/foxboro
subscribe:   mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: