> According to my interpertation of the documentation, to enable the operator > action journal at boot up, > all you need to do is add the following to the /usr/fox/wp/data/init.user > file. > > add: OJLOG=DLP01,Ehist01 also add: gctsize=14 dmtlist=OJLOG after the OJLOG line. Make sure that hist01 is the name of the historian and if you do not want the OAJ messages to print to the printer, change LP01 to a nonexistent printer -- Jeremy Milum Huntsman Polymers Corporation P.O. Box 3986 Odessa, TX 79760 Phone: 915-640-8436 Pager: 915-742-4289 Email: jeremy_milum@xxxxxxxxxxxx ___________________________________________________________________ This list is neither sponsored nor endorsed by The Foxboro Company. Use the information obtained here at your own risk. For disclaimer, see http://www.thecassandraproject.org/disclaimer.html#maillist list info: http://www.freelists.org/list/foxboro subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave