Re: [foxboro] Opening a set in Windows MESH 8.3 aimapi

Jack -

Re-read Alex's last sentence a couple of times, and note the "smiley" in my
original message.

Greg


foxboro-bounce@xxxxxxxxxxxxx wrote on 03/19/2008 02:25:44 PM:

> Greg,
>
> Please don't take this as being argumentative and not that I don't agree
> a lot of the time, but I have to defend Alex concerning this reply as he
> gave me the information I needed immediately (which is not shown below).
> I even appreciated his document references and will retain them for when
> I have time to read these documents as I am interested in learning more
> about apitst. Nuff said....
>
> Thanks,
> Jack Easley
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> On Behalf Of Gregory A Hurwitt
> Sent: Wednesday, March 19, 2008 11:49 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] Opening a set in Windows MESH 8.3 aimapi
>
> Typical Invensys response.  The customer is expected to put out twice
> the
> effort to gain half the results.
>
> Perhaps Alex can issue a Quick Fix to his previous e-mail ....
>
> :)
>
> Greg Hurwitt
>
>
> AJ wrote on 03/19/2008 11:25:50 AM:
>
>
> > There is some documentation in B0193UD for foxtst.
> >
> > There is some documentation in B0193YL for apitst.
> >
> > Given that the two are nearly (but not quite) identical, you can get a
> > pretty good feel for either by reading both.
> >

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: