Re: [foxboro] Opening a set in Windows MESH 8.3 aimapi

Typical Invensys response.  The customer is expected to put out twice the
effort to gain half the results.

Perhaps Alex can issue a Quick Fix to his previous e-mail ....

:)

Greg Hurwitt


AJ wrote on 03/19/2008 11:25:50 AM:


> There is some documentation in B0193UD for foxtst.
>
> There is some documentation in B0193YL for apitst.
>
> Given that the two are nearly (but not quite) identical, you can get a
> pretty good feel for either by reading both.
>
>

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: