Re: [foxboro] OSISoft PI Startup on P90 Windows 2003 Server

I suppose you checked if the foxapi is running? Make sure your foxapi is 
started before you start the fxbais.Also you should be able to start the 
interface yourself from the directory. On a Unix system it's under 
/opt/piapi/bin/go_pistart . We're running a pi interface on a unix box, so 
 i have no experience with the windows version. 
Good luck

Dirk Pauwels - DCS/MOC coordinator 
Engineering dept.
Hexion Specialty Chemicals
E mail: dirk.pauwels@xxxxxxxxxx
T.  +32.(0)3.570.95.97
F.  +32.(0)3.570.16.09
Mob. +32.(0)497.428.300



"Ball, Patrick G." <PGBALL@xxxxxxxxxxxxxx> 
Sent by: foxboro-bounce@xxxxxxxxxxxxx
21/04/2009 16:43
Please respond to
foxboro@xxxxxxxxxxxxx


To
<foxboro@xxxxxxxxxxxxx>
cc

Subject
[foxboro] OSISoft PI Startup on P90 Windows 2003 Server






P90 Windows 2003 Server
FoxAPI 4.3.2
PI Interface 2.3.3.49 for Windows

I am getting an error on bootup that one or more service did not start,
check the event log and process is fxbais which is the PI interface.

HELP!!
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: