Re: [foxboro] OPC

One of installations I was involved with used Foxboro OPC I/O Gate residing in 
an AW70 w/control
The main DCS runs on ver6.4 NT, so I do not know if it is applicable for you
The OPC was for purpose of getting and sending points to OPC server (APACS) at 
the IPS/FGS system
Most of the points are input to DCS some 700-800 points and the output from DCS 
is some 20 points
So far the system is running okay with that load
Hope this can give you further idea
Rgds,


-- 

--------- Original Message --------- 

DATE: Mon, 15 Mar 2004 12:02:07 
From: "Balmer, Robert D." <rbalmer@xxxxxxxxxxxxxxx> 
To: "Foxboro DCS Mail List" <foxboro@xxxxxxxxxxxxx> 
Cc: 

>Is anyone using OPC to send information from the I/A system to Remote 
>stations. 
>If so what version level are you at and what software packages did you have 
>to install? 
>I have a small project that I am trying to get about 40 to 50 fire alarm 
>points to our guard house from the I/A system. 
>We are at 6.1.1 Unix and have a stand alone NT system that has some of the 
>points on it. 
>Any ideas out there? 
>Thanks 
>Robert Balmer 
>Climax Molybdenum Co. 
>Applications Analyst/Programmer 
>Fort Madison Iowa 
>319 463 2206 
> 


Need a new email address that people can remember
Check out the new EudoraMail at
http://www.eudoramail.com

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: