Re: [foxboro] OAJ in Aim

Thanks, Martin.

I couldn't remember if the problem was in the CAD or AIM*. Now we know.

Regards,
 =

Alex Johnson
Invensys Process Systems
10900 Equity Drive
Houston, TX 77041
713 329 8472 (voice)
713 329 1600 (switchboard)
713 329 1944 (fax)
alex.johnson@xxxxxxxxxxxxxxxx
http://ips.invensys.com =


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Theobald, Martin
Sent: Saturday, June 21, 2008 4:27 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] OAJ in Aim

List,
 =

The problem was first identified when importing the OAJ data with the
Alarm Management Tool PlantState Suite.  Only data originating from the
Alarm Manager (CAD) has the problem.  The problem has been seen on
Windows XP systems from 8.0B to 8.4.  I have not personally noticed the
problem on Ver 4.3, 6.x or 7.x running on either Solaris, NT4 or XP.
 =

CAR 1008305 was entered June-2006.  A QF was released in July-2007, but
was withdrawn around two weeks later due to conflicts with other QFs.
 =

CAR 1009910 was entered April-2007. This QF rolls up the above CAR with
a number of others.  As of February 2008 there was no estimated release
date for a QF for this CAR.
 =

Reading through the release notes for AIM*AT 3.3
(http://support.ips.invensys.com/content/documents/iaseries/b0400/b0400e
l_e.pdf), the problem is not fixed by this release, which is
understandable as it is a problem with the Alarm Manager and not AIM.
 =

 =

Regards,
 =

Martin Theobald
________________________________

From: foxboro-bounce@xxxxxxxxxxxxx on behalf of Ron Schafer
Sent: Fri 20/06/2008 19:47
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] OAJ in Aim



Im not 100% sure about the problem being in the CAD, but I do know that
using aim spy the record shows them without the characters.
Ronald G. Schafer
Distributed Controls System Administrator
White Birch Paper Company
Bear Island L.L.C. Division
Ashland VA, 23005
Phone 804-227-4034
Fax 804-227-4052

Email: rschafer@xxxxxxxxxxxxxxxxxxxxxx




-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Theobald, Martin
Sent: Friday, June 20, 2008 2:15 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] OAJ in Aim

Ron,

I have certainly seen this on V8.x systems and the culprit was the CAD
and not AIM.  QFs were released but then withdrawn for reasons I can't
remember.  Please raise another CAR for your combination of I/A, CAD and
AIM.


Regards,

Martin Theobald
________________________________
From: foxboro-bounce@xxxxxxxxxxxxx on behalf of Ron Schafer
Sent: Fri 20/06/2008 18:28
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] OAJ in Aim



Content-Type: text/plain;
        charset=3D"US-ASCII"
Content-Transfer-Encoding: quoted-printable
I'm running Aim 3.2.3.53 and all the operator action acknowledge (Unack
to ack) records are missing data. They are missing the first 2
characters for each field starting with the act_type and below. Has
anyone seen this in their system or know of a fix or CAR?

=3D20

Ronald G. Schafer

Distributed Controls System Administrator

White Birch Paper Company

Bear Island L.L.C. Division

Ashland VA, 23005

Phone 804-227-4034

Fax 804-227-4052

Email: rschafer@xxxxxxxxxxxxxxxxxxxxxx

=3D20

=3D20

=3D20




-- No attachments (even text) are allowed --
-- Type: text/x-vcard
-- File: rschafer@xxxxxxxxxxxxxxxxxxxxxxxxxx
-- Desc: rschafer@xxxxxxxxxxxxxxxxxxxxxxxxxx




_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave






* Confidentiality Notice:
This e-mail and any associated files are intended solely for the
individual or entity to whom they are addressed. Please do not copy it
or use it for any purposes, or disclose its contents to any other
person. Further, this e-mail and any associated files may be
confidential and further may be legally privileged. This email is from
the Invensys Process Systems business unit of Invensys plc which is a
company registered in England and Wales with its registered office at
Portland House, Bressenden Place, London, SW1E 5BF (Registered number
166023).  For a list of European legal entities within the Invensys
Process Systems business group, please click here
http://www.invensys.com/legal/default.asp?top_nav_id=3D77&nav_id=3D80&prev_=
i
d=3D77.

If you have received this e-mail in error, you are on notice of its
status. Please notify us immediately by reply e-mail and then delete
this message from your system. Thank you for your co-operation. You may
contact our Helpdesk on +44 (0)20 7821 3859 / 2105 or email
inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail and any attachments thereto
may be subject to the terms of any agreements between Invensys (and/or
its subsidiaries and affiliates) and the recipient (and/or its
subsidiaries and affiliates).


-- No attachments (even text) are allowed --
-- Type: application/ms-tnef
-- File: winmail.dat




_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave


-- No attachments (even text) are allowed --
-- Type: text/x-vcard
-- File: rschafer@xxxxxxxxxxxxxxxxxxxxxxxxxx
-- Desc: rschafer@xxxxxxxxxxxxxxxxxxxxxxxxxx




_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave






* Confidentiality Notice:
This e-mail and any associated files are intended solely for the
individual or entity to whom they are addressed. Please do not copy it
or use it for any purposes, or disclose its contents to any other
person. Further, this e-mail and any associated files may be
confidential and further may be legally privileged. This email is from
the Invensys Process Systems business unit of Invensys plc which is a
company registered in England and Wales with its registered office at
Portland House, Bressenden Place, London, SW1E 5BF (Registered number
166023).  For a list of European legal entities within the Invensys
Process Systems business group, please click here
http://www.invensys.com/legal/default.asp?top_nav_id=3D77&nav_id=3D80&prev_=
i
d=3D77.

If you have received this e-mail in error, you are on notice of its
status. Please notify us immediately by reply e-mail and then delete
this message from your system. Thank you for your co-operation. You may
contact our Helpdesk on +44 (0)20 7821 3859 / 2105 or email
inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail and any attachments thereto
may be subject to the terms of any agreements between Invensys (and/or
its subsidiaries and affiliates) and the recipient (and/or its
subsidiaries and affiliates).


-- No attachments (even text) are allowed --
-- Type: application/ms-tnef
-- File: winmail.dat


 =

 =

_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 =

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
 =



* Confidentiality Notice:
This e-mail and any associated files are intended solely for the individual=
 or entity to whom they are addressed. Please do not copy it or use it for =
any purposes, or disclose its contents to any other person. Further, this e=
-mail and any associated files may be confidential and further may be legal=
ly privileged. This email is from the Invensys Process Systems business uni=
t of Invensys plc which is a company registered in England and Wales with i=
ts registered office at Portland House, Bressenden Place, London, SW1E 5BF =
(Registered number 166023).  For a list of European legal entities within t=
he Invensys Process Systems business group, please click here http://www.in=
vensys.com/legal/default.asp?top_nav_id=3D77&nav_id=3D80&prev_id=3D77.

If you have received this e-mail in error, you are on notice of its status.=
 Please notify us immediately by reply e-mail and then delete this message =
from your system. Thank you for your co-operation. You may contact our Help=
desk on +44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@xxxxxxxxxxxxx T=
his e-mail and any attachments thereto may be subject to the terms of any a=
greements between Invensys (and/or its subsidiaries and affiliates) and the=
 recipient (and/or its subsidiaries and affiliates).


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: