Re: [foxboro] Nodebus Cable B fault

Do you have system monitor and network fault detection logging
enabled?  There are several files you can create on a V7.x AW that
will record system monitor and NFD messages.  Very helpful for
troubleshooting.

Regards,

Kevin FitzGerrell

On 2/24/08, Kashif Ijaz <kashifijaz93@xxxxxxxxxxx> wrote:
> I found the current Nodebus test Initiator was AW70(No control), when I 
> changed this to AW51F. Then the fault disappeared and the LEDs of Switch B 
> also started flashing.
>
> What can be the cause. Is the AW70 not designed for being the Nodebus 
> Initiator?
>
> Best regards,
>
> Kashif Ijaz
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: