Re: [foxboro] Node Troubles????

Any chance that there's been incidents of a station being left with an
engineering environment open (thus giving operators access to the Select
display)?

http://en.wikipedia.org/wiki/Occam%27s_razor

Greg

______________________________________________________________________________________


Greg Hurwitt
Engineering Associate

E-Mail:  gregory.hurwitt@xxxxxxxx
Postal Address:
BASF Corporation
602 Copper Road
Freeport, TX 77541
USA

BASF - The Chemical Company


foxboro-bounce@xxxxxxxxxxxxx wrote on 11/13/2007 09:15:00 AM:

> Hi Terry
>
> 1)   We don't have any sequence blocks at all on this NODE.
> 2)   I've outputted Text Files of all our displays  and found no
> instances of a .MA parameter that should not be there.  Tann Trin had
> also done the same of Foxboro Montreal some years ago.
> 3)    And we don't use FoxAPI or AIMAPI for anything offline.  PI
> accesses our system through a FD30 INT and serial Modbus setup.  AIM is
> running on the AW51D Box which is the host for this NODE.
>
> I believe I'll have to go through the displays once more...maybe
> manually to be absolutely sure of nothing being connected to the blocks.
>
> Thanks again

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: