Re: [foxboro] Need help
- From: <MUGARTET@xxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 19 Apr 2004 14:04:41 -0300
Mark,
I can tell you our local experience, which is similar to your option 4. =
We are running both PI and DMC, in two separate AW51D's, only for the =
sake of cpu load. Both machines have 128MB.=20
The one runnning DMC has 5 controllers running (4 of them quite big), =
AspenIQ for online predictions (11 predictions) and VSCalc for auxiliary =
calculations (2 fortran routines). On top of that DMCBridge for =
Operator/Engineering interfase. So, it's quite loaded: the only problem =
so far (its been running 24x7 for the past 5 years) is that every 3 to 4 =
months we need to reboot it because it runs out of memory. I've trying =
to buy more memory to fix it, but nobody seems to care a lot about it =
since its only 20-30 minutes offline every now and then. This machine =
also runs legacy Historian for DMC points.
The one running PI only stops for periodic backup. We have PI running =
likewise on an AW51A, with 32MB RAM, on another node, and it is also =
"unstoppable". The first one reads +5000 points and the second, +3000. =
Only need to be careful to run different instances of the PI-API, in =
different phases to avoid overloading node traffic. PI runs a local =
buffer in case you loose connection to the corporarte network. Depending =
your hard disk space you can work for days without network and recover =
everything when you have it back (we had this problem for about 1 week =
and recovered everything).
That been said, I would recommend a similar setup for any new =
installation.
Regards,
Mart=EDn R. Ugarte
Control Avanzado y Sistemas
Refiner=EDa La Plata - RepsolYPF
Tel +54-221-4298310 ext. 28034
Fax +54-221-4298310 ext. 28033
mailto:mugartet@xxxxxxxxxxxxx
AVISO LEGAL:
Esta informaci=F3n es privada y confidencial y est=E1 dirigida =
=FAnicamente a su destinatario. Si usted no es el destinatario original =
de este mensaje y por este medio pudo acceder a dicha informaci=F3n por =
favor elimine el mensaje. La distribuci=F3n o copia de este mensaje =
est=E1 estrictamente prohibida. Esta comunicaci=F3n es s=F3lo para =
prop=F3sitos de informaci=F3n y no debe ser considerada como propuesta, =
aceptaci=F3n ni como una declaraci=F3n de voluntad oficial de REPSOL YPF =
S.A. y/o subsidiarias y/o afiliadas. La transmisi=F3n de e-mails no =
garantiza que el correo electr=F3nico sea seguro o libre de error. Por =
consiguiente, no manifestamos que esta informaci=F3n sea completa o =
precisa. Toda informaci=F3n est=E1 sujeta a alterarse sin previo aviso.=20
This information is private and confidential and intended for the =
recipient only. If you are not the intended recipient of this message =
you are hereby notified that any review, dissemination, distribution or =
copying of this message is strictly prohibited. This communication is =
for information purposes only and shall not be regarded neither as a =
proposal, acceptance nor as a statement of will or official statement =
from REPSOL YPF S.A. and/or subsidiaries and/or affiliates. Email =
transmission cannot be guaranteed to be secure or error-free. Therefore, =
we do not represent that this information is complete or accurate and it =
should not be relied upon as such. All information is subject to change =
without notice.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts: