Re: [foxboro] NVRAM

I am confused about your situation.  Do you or don't you have a
Crt plugged into the primary graphics adaptor on the D ?  Running
add_periphs (/usr/local) should find all hardware and make it known to the 
system.

wrb



>
>
>Hi, gentlemen:
>       We have a WP51D than can=B4t start Xwindows because it can=B4t find
>/dev/fb1 (it seems to be the video driver). This is a double headed =
>station.
>We have compared with another station and the only diference we found
>between them is that the one that boot ok has another video card =
>configured.
>We want to configure by hand the another device using Sun OpenBoot.=20
>There is a procedure to do it ?. In the Openboot manual we coudn=B4t =
>find how
>to do it, without learnig  to program using forth programming language.
>
>Any help will be apreciated!
>
>Regards
>
>      Claudio A. Perez
>  Sr. Control Systems Eng
>        PROFERTIL S.A.
>
>
>_______________________________________________________________________
>This mailing list is neither sponsored nor endorsed by Invensys Process
>Systems (formerly The Foxboro Company). Use the info you obtain here at
>your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
>foxboro mailing list:             http://www.freelists.org/list/foxboro
>to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
>to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>




_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: 
http://photos.msn.com/support/worldwide.aspx

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

Other related posts: