Re: [foxboro] Moving XP box from 7.0 to 8.x

At 04:48 PM 1/27/06 -0500, Boulay, Russ wrote:

 >
 >Tom.....what Dell type box do you have?
 >
 >First....you absolutely need the dual NIC's to install and run V8.x.
 >Second...the Dell Restore CD you are using (depending on it's vintage)
 >probably doesn't have the Drivers for the Allied Telesyn Nics....so there is
 >a separate CD for the NICs as part of the V8.0b software.
 >Have you used that CD?
 >
 >All that said...be sure and select two NICS during the install process.

Russ,

Tom may be on his way home. (Weekend, you know....)

We have the Dell 340. Maybe about 2 years old.

We installed the two Allied Telesyn NICs and it was even worse. The box 
always hangs during these continual reboots (black screen, no disk 
activity, just hang). It requires a power cycle to get going.

And at no time we were prompted for the dual NICs in the Day 0 install process.

At any rate, it looks like we need to get a new Dell/Foxboro Restore CD.

Duc

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: