Re: [foxboro] Motor Start/Stop Logic

I must be missing something in all this.  Don't you all use the auxiliary
contacts built into the motor starter to hold in the starter?

I don't see any operational deficiencies in either GDEV or MTR.
The only improvement I might make would be to transition the AUTDSR back to
0 if the motor didn't start.
That way you wouldn't have to toggle AUTDSR twice (off, then on again) to
try restarting the pump.

Brad Wilson
ExxonMobil Chemical Co
Edison Synthetics Plant
732-321-6115
732-321-6177 fax
Brad.S.Wilson@xxxxxxxxxxxxxx

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: