Dave, Give this site a check http://www.expertune.com/xpconnect.html Regards,=20 Mickey L. Allen=20 -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of David Johnson Sent: Wednesday, June 21, 2006 1:01 PM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Moore Controller Tuning into I/A Hello all, Is there any type mapping from a Moore Products electronic single=20 loop controller PID tuning parameters into I/A? Sorry, but I do not have the model numbers of the controllers handy=20 at the moment. Regards, David =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave