Re: [foxboro] Modbus Slave

We did this once to get two Honeywell systems to talk to each other.  We 
used a box called an Omnii-Comm, which can be a master/slave, in several 
protocols, on up to 4 ports.

Corey Clingo
BASF Corp.





"Joe Gale (MP)" <JGALE@xxxxxxxxxxx> 
Sent by: foxboro-bounce@xxxxxxxxxxxxx
12/14/2005 09:47 AM
Please respond to
foxboro@xxxxxxxxxxxxx


To
<foxboro@xxxxxxxxxxxxx>
cc

Subject
[foxboro] Modbus Slave






I was wondering if there is a way to make a Modbus connection to Foxboro
where Foxboro is the slave device?  Reading through the FBM224
documentation, it says that the gateway has to be the master.  We want
to be able to talk to a GE Harris D20 RTU and I am being told that they
will only do it with the RTU as master.  Anyone have a viable solution?
Thanks,

Joe Gale
DCS Administrator
Minnesota Power
1210 NW 3rd Street
Cohasset, MN 55721

218-328-5036 x4611
email:jgale@xxxxxxxxxxx







 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: