Re: [foxboro] Modbus Slave

Joe

We use a an Integrator 30B configured as a Modbus Slave.  I'm sure you could 
use it, only thing is, it is limited to serial communication of 19.2 kBaud I 
think.  More info could be found on the CSC Site.

----- Original Message ----- 
From: "Joe Gale (MP)" <JGALE@xxxxxxxxxxx>
To: <foxboro@xxxxxxxxxxxxx>
Sent: Wednesday, December 14, 2005 11:47 AM
Subject: [foxboro] Modbus Slave


I was wondering if there is a way to make a Modbus connection to Foxboro
where Foxboro is the slave device?  Reading through the FBM224
documentation, it says that the gateway has to be the master.  We want
to be able to talk to a GE Harris D20 RTU and I am being told that they
will only do it with the RTU as master.  Anyone have a viable solution?
Thanks,

Joe Gale
DCS Administrator
Minnesota Power
1210 NW 3rd Street
Cohasset, MN 55721

218-328-5036 x4611
email:jgale@xxxxxxxxxxx




_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: