There is a version of the device gateway (COM30) that does Modbus slave. > -----Original Message----- > From: Joe Gale (MP) [mailto:JGALE@xxxxxxxxxxx] > Sent: Wednesday, December 14, 2005 10:48 AM > To: foxboro@xxxxxxxxxxxxx > Subject: [foxboro] Modbus Slave >=20 >=20 > I was wondering if there is a way to make a Modbus connection=20 > to Foxboro > where Foxboro is the slave device? Reading through the FBM224 > documentation, it says that the gateway has to be the master. We want > to be able to talk to a GE Harris D20 RTU and I am being told=20 > that they > will only do it with the RTU as master. Anyone have a viable=20 > solution? > Thanks, >=20 > Joe Gale > DCS Administrator > Minnesota Power > 1210 NW 3rd Street > Cohasset, MN 55721 >=20 > 218-328-5036 x4611 > email:jgale@xxxxxxxxxxx >=20 >=20 > =20 > =20 > ______________________________________________________________ > _________ > This mailing list is neither sponsored nor endorsed by=20 > Invensys Process > Systems (formerly The Foxboro Company). Use the info you=20 > obtain here at > your own risks. Read=20 > http://www.thecassandraproject.org/disclaimer.html > =20 > foxboro mailing list: =20 > http://www.freelists.org/list/foxboro > to subscribe: =20 > mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin > to unsubscribe: =20 > mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave > =20 >=20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave