Re: [foxboro] Marker Movement

Re: The question is how do you get a marker to move accurately in both
directions with the two separate inputs

If you are using the DM, the answer is you don't do this. A marker can move
in one direction only. I admit it looks like you can configure it to move
both up and down and right and left at the same time, but it does not work.

The voice of experience.


Re: FoxView

Does FoxView support marker movement in both directions at the same time?



Regards,

Alex Johnson
Invensys
10707 Haddington
Houston, TX 77063
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
ajohnson@xxxxxxxxxxx <mailto:ajohnson@xxxxxxxxxxx> 


        -----Original Message-----
        From:   James B Koenig [SMTP:koenigjb@xxxxxxxxxxxxx]
        Sent:   Thursday, September 26, 2002 3:47 PM
        To:     foxboro@xxxxxxxxxxxxx
        Subject:        [foxboro] Marker Movement


        I have a question about marker movement. I haven't had a problem
until I
        tried to get a marker to move with both row location < and col
location <(2
        separate inputs). What we are trying to do is get a marker to plot
within a
        grid on the display. When I configure the row location and then the
col
        location, the column works perfectly but the row location is
distorted. If
        I reverse the configuration order and do the Column then the row,
then the
        row works correctly and column is distorted.

        The question is how do you get a marker to move accurately in both
        directions with the two separate inputs. Where can I go and find the
        information explaining how/why this is done. The information I have
briefly
        explains marker movement, but I have not found anything explaining
this or
        I just don't understand what I have read.

        I am using Foxboro  I/A legacy DM at version 4.3 on AP51B's, WP30's,
        WP51B's.

        Thanks for the help in advance

        James Koenig
        DCS specialist
        BASF Corp.


         
         
        
_______________________________________________________________________
        This mailing list is neither sponsored nor endorsed by Invensys
Process
        Systems (formerly The Foxboro Company). Use the info you obtain here
at
        your own risks. Read
http://www.thecassandraproject.org/disclaimer.html
         
        foxboro mailing list:
http://www.freelists.org/list/foxboro
        to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
        to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
         
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: