Re: [foxboro] MICRO-I/A with NBI don´t boot

Hi List

I was trying to install one Micro I/A type 1 station in a system with AW51D
host station, with 3 CP30s, and two WP51D, all under I/A Nodebus
ver.6.2.1(UNIX) and hosted by the AW51D.
I used an NBI connected to AUI port of one Hub (across Nodebus Transceiver)
and ethernet cable to a Micro I/A.
I load a commited diskette with the new station and the Upload Server
diskette.
When Micro I/A is reseted, the red led turn on about 15 seconds, then both,
red and green turn on and also the ethernet indicator, about 30 seconds the
ethernet led goes off about half of seconds and turns on again, and it
repeat for always.
In the SMDH appear the Micro I/A as red station (failed)
In the Lbug Map program, there doesn´t appear the Micro I/A serial number,
it´s unactive the Unbooted Stations button.

Thanks in advance and best regards



Bismarck Alban
Tecniequipos S.A.
Quito-Ecuador
poh.(593)2-2462072, (593)2-2462074, (593)2-2449624
fax.  (593)2-2449625

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: