No, we have them on separate nodes. =20 -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Fitzgerrell Sent: Friday, December 21, 2007 10:14 am To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] MESH Upgrade question Do you have all your gateways on the same node? No, I'm not having any problems obtaining GW30B modules now. Regards, Kevin FitzGerrell On Dec 21, 2007 11:41 PM, Chaiket, Thom <tchaiket@xxxxxxxx> wrote: > Under the original upgrade design, the host AW would sit on the MESH > while the gateways are on the other side. According to Foxboro, the > gateways cannot communicate with their host when they are rebooted. As > to how they are being rebooted, I don't have an answer. =3D20 > > We rejected the idea of keeping an AW as a host on the current network. > For our application, it would imply having both the MESH and the > carrierband network. It defeated the purpose of having an upgrade if > that results in having to manage two networks. =3D20 > > Are you having any difficulties obtaining the GW30B in general? = =3D20 > =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave