Re: [foxboro] Logic Question

Brian,
You can use Tom's solution, however instead of relying on periods, you can
have your boolean output be driven by:

OSP M02 ; where M02 = -1 (negative one = single one shot pulse)
DOFF M03 ; this is your timeout period after which you assume that if the
number hasn't changed, then your counter must not be counting.

Note of caution: do not put the OSP inside a conditional branch statement.

Hope this helps,

Maks Wilde


-- 
Confidentiality Warning: This message and any attachments are intended only
for the use of the intended recipient(s), are confidential, and may be
privileged. If you are not the intended recipient, you are hereby notified
that any review, retransmission, conversion to hard copy, copying,
circulation or other use of this message and any attachments is strictly
prohibited. If you are not the intended recipient, please notify the sender
immediately by return e-mail, and delete this message and any attachments
from your system.


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: