Re: [foxboro] Load MESH FCP Using iccdrvr.tsk and Print File format


Tom,

I have found that adding and modifying compounds/blocks in I/A v8.2+ is
not the same as Unix I/A versions and up to I/A v8.1.  Instead, I have
been using the standard bldcio script, which I have sent to you offline.
The syntax is "bldcio [station] [file]" to add blocks and "bldcio -m
[station] [file]" to modify blocks.

Thanks,
Philip Pulas
Tesoro Corp.
Martinez, CA

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Tom VandeWater
Sent: Thursday, December 20, 2007 11:14 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Load MESH FCP Using iccdrvr.tsk and Print File format

All Knowing List,

On this subject I am: "1st time caller, long time listener"

David Johnson: If you want my vote for President this year solve this
problem;<)
Yes, Hawaiians can vote for president, (even transplanted Hawaiians like
me)

Alex Johnson:  Even though I'm sure to get an away message from you
informing me that you are currently in Lower Slobovia, with limited
email access, I know you will have read this within seconds of my
sending so consider this a challenge between you and your brother
David mentioned above to see who answers first.

I am trying to use iccdrvr.tsk to load FCP002 on a training system.

I am able to enter and exit FCP002 using the ICC graphical interface.

I have been sure not to be in ICC for FCP002 when trying to run
iccdrvr.tsk

From the Korn Shell,
(at least I think I am in KORN shell, How do I verify?),
I issue the following command on the command line:

$ iccdrvr.tsk -i 2FFP02.txt

2FFP02.txt is being used as my input file and the first few lines look
like this:

OPEN FCP002 ALL TJV
ADD   =3D FLA_D1133
  TYPE   =3D COMPND
  DESCRP =3D IA COMPOUND

The following error is echoed to the screen:

ECHO     1 OPEN FCP002 ALL TJV
FAIL     1 OPEN FCP002!: Thu Dec 20 08:07:38 2007 -14 ICCopen error:
class=3D 1 error=3D -1000 text=3D icConnectCp: error on cs_reg_exit
FLSH     2 ADD   =3D FLA_D1133
FLSH     3   TYPE   =3D COMPND
FLSH     4   DESCRP =3D IA COMPOUND

So the problem appears to be that iccdrvr.tsk is unable to open FCP002
but I don't know why.  Any ideas or suggestions?
Mele Kalikimaka,
Tom VandeWater
Control Conversions Inc.
Tesoro Hawaii Project Manager
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: