Re: [foxboro] Letterbug Configurator on PDA Dell Axim X50v

The Dell AXIM x50 is what Foxboro ships now...don't know if it is the same
as the x50v

You must disable all incoming beams or you get that message.

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of patric.bonavetti@xxxxxxxxxxxxxx
Sent: Friday, May 13, 2005 10:27 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Letterbug Configurator on PDA Dell Axim X50v

Hi Everybody.

I've tried to use Letterbug Configurator on a PDA Dell Axim X50v.

The installation of the application: HPS_Config_ARMV4.CAB Ver. 1.2
02-sept-2004
which i've downloaded from Invensys-Website was fine.

But the following error appears on the PDA after trying to assign letterbug
to a FCP270:

GetCommState fail

I know supported devices are HP IPAQ's only.

But maybe somebody out there has found a solution to get it work with Dell
Axim to.

Regards,

Patric

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: