Re: [foxboro] LINE PRINTER REPLACEMENT

I meant to be more specific .... when assigning compound GRxDVx, rather
than assigning LP01, can I assign an ethernet port? Or can I link LP01 to
an ethernet port?

<<<
I know that all these alarm logging tools can connect via RS232 just as a
printer would ... but is it possible to drive the alarms out an ethernet
port instead of a COM processor?  Rather than connecting a PC to the COM10
via RS232 and then connecting the PC to my plant LAN via ethernet ... can I
run one of these alarm loggers on a LAN computer and have the AW provide
the alarms directly through the ethernt port?  And, would I want to?  (I'm
thinking traffic)

Brad Wilson
Process Control Engineer
ExxonMobil Chemical Co
Edison Synthetics Plant
732-321-6115
732-321-6177 fax
Brad.S.Wilson@xxxxxxxxxxxxxx

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: