Re: [foxboro] Interrupt level 3

Claudio,

The interrupt level 3 should be an SBUS error.

Are you using a DNBT with this 51D or are you using a DNBI (with the
converter)?  

Regards,

Kevin FitzGerrell
Systems Engineer
Foxboro New Zealand

 --- "Perez, Claudio" <CPerez@xxxxxxxxxxxxxxxx> wrote: > 
> Hi,
> We were experiencing an AW51D lock with the error message INTERRUPT
> LEVEL 3
> NOT SERVICED.
> After searching a bit on internet we discovered some of information
> regarding a problem with the paralel port.
> Does anybody have had this problem and who was it corrected?
> 
> Regards
> 
>      Claudio A. Perez
>        DCS Engineer
>        PROFERTIL S.A.
>  
>  
>
_______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys
> Process
> Systems (formerly The Foxboro Company). Use the info you obtain here
> at
> your own risks. Read
> http://www.thecassandraproject.org/disclaimer.html
>  
> foxboro mailing list:            
> http://www.freelists.org/list/foxboro
> to subscribe:        
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:     
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>   

http://messenger.yahoo.com.au - Yahoo! Messenger
- A great way to communicate long-distance for FREE!
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: