Re: [foxboro] Integrator 30 Style B failing (P0961BD-0E)
- From: "Kevin Fitzgerrell" <fitzgerrell@xxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Sun, 16 Mar 2008 06:54:55 +0900
Kashif,
Glad to hear that resolved the problem! I'd still be concerned though
- high I/O scan should cause overruns rather than loss of comms.
Regards,
Kevin
On Sat, Mar 15, 2008 at 9:01 PM, Kashif Ijaz <kashifijaz93@xxxxxxxxxxx> wrote:
> Kevin,
>
> Thanks, after increasing the period of different compounds and staggering
> the phases, I was able to bring down the I/O scan from 79% to 38%. Since then
> ( about a week back) , data communication is ok and we did not need to reset
> the Integrator.
>
> Regards,
>
> Kashif Ijaz
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
