Re: [foxboro] Installing CP40FT

Thanks Roger,
You are right on!  I totally forgot about that one!  I had a spare kicking 
around and installed it and everthing is fine now.  Can continue with project, 
and thanks for the prompt responses, all!!!!
Dale Gillis

Inst Tech
902-625-2460 Ext 4401
dale.gillis@xxxxxxxxxxxxx
> 
> From: "Roger D Nugent" <nugentr@xxxxxxxxxxxxx>
> Date: 2003/09/08 Mon PM 12:01:09 GMT-04:00
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] Installing CP40FT
> 
> 
> Dale
> 
> If it's a CP40A, it needs the X-clip in the back.
> 
> 
> Roger
> 
> 
> 
> 
>                                                                               
>                                                          
>                       <doctorg@xxxxxxxx                                       
>                                                          
>                       tico.ca>                        To:  foxboro            
>                                                          
>                       Sent by:                        cc:                     
>                                                          
>                       foxboro-bounce@fr        Subject:  Re: [foxboro] 
> Installing CP40FT                                               
>                       eelists.org                                             
>                                                          
>                                                                               
>                                                          
>                                                                               
>                                                          
>                       09/08/2003 10:48                                        
>                                                          
>                       AM                                                      
>                                                          
>                       Please respond to                                       
>                                                          
>                       foxboro                                                 
>                                                          
>                                                                               
>                                                          
>                                                                               
>                                                          
> 
> 
> 
> 
> I can safely say yes to all those questions.  I've checked and
> double-checked these issues.
> >
> > From: Neil Martin <neil_martin@xxxxxxxxxxxx>
> > Date: 2003/09/08 Mon AM 11:25:54 GMT-04:00
> > To: foxboro@xxxxxxxxxxxxx
> > Subject: Re: [foxboro] Installing CP40FT
> >
> >
> >
> >
> >
> > Is it defined in Sys Def as FT?
> >
> > Do both modules boot by themselves?
> >
> > Do you have the clip installed across the front of the FT pair of
> Modules?
> >
> > Are the CP EEPROM software revs the same level?
> >
> > Neil Martin
> > Huntsman Polymers Corporation
> > 2505 South Grandview
> > Odessa, TX.  79766
> > ph) 432-640-8436
> > pager)432-742-4289
> > email page)9157424289@xxxxxxxxxxxxxxxxxx
> >
> >
> >
> >                       <doctorg@xxxxxxxx
> >                       tico.ca>                 To:
> <foxboro@xxxxxxxxxxxxx>
> >                       Sent by:                 cc:
> >                       foxboro-bounce@fr        Subject:  [foxboro]
> Installing CP40FT
> >                       eelists.org
> >
> >
> >                       09/08/03 10:01 AM
> >                       Please respond to
> >                       foxboro
> >
> >
> >
> >
> >
> >
> > Could anyone give me specific instructions on how to install a CP40FT
> Pair
> > on V 6.3 AW51B Box.  I'm using SYs Def 2.3.  Did the commit thing and
> > everything seems to go fine but I can only get one of the pair to boot.
> > They will not marry.  Any hints would be great.
> >
> >
> > Dale Gillis
> > Inst Tech
> > 902-625-2460 Ext 4401
> > dale.gillis@xxxxxxxxxxxxx
> 
> 
> 
> 
> 
>  
>  
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>  
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>  
> 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: